As aeration equipment for sewage systems, widely used microporous aerators can be divided into two types: movable and fixed. If there are no special requirements on the installation site, it is recommended not to choose a fixed type, otherwise besides installation, it will be very troublesome to maintain in the future, and even delay the efficiency of sewage treatment. At present, there are generally many lifting devices installed in our factory. Due to flexible installation, after the base is fixed, the air pipe can be directly installed into the grid bar. The air pipe is placed in the water tank, and bubbles diffuse through the holes on the pipe, delivering oxygen to the water. This microporous aerator is highly movable and can move freely during the later stages of installation.
Consider the convenience of later maintenance
As an enterprise that integrates production and installation, our factory has also introduced a wide range of products. However, when choosing, attention should be paid to the performance of the selected microporous aerator, whether the outlet is easily blocked, whether the material of the intake pipe is easily damaged, and the degree of bubble diffusion.
Select the type based on the on-site situation
Only by selecting microporous aerators with stable performance and long service life can a higher utilization rate be achieved. If there are clear requirements for the configuration, it is necessary to introduce large bubbles, so it is necessary to install fixed aeration equipment. In this way, by combining forward and counterclockwise rotation, a large number of uniform bubbles can be generated under the action of different directions. This fixed type may have different installation methods, as it cannot be moved or maintained at any time, but is more suitable for supplying oxygen to large amounts of water. When choosing an aerator, it can be determined based on the actual situation on site, the depth of the water tank, and the composition of the sewage concentration.
In the process of industrial wastewater treatment, aerators will be used in various ways to meet wastewater discharge standards. To ensure normal degradation, it is necessary to maintain the oxygen content in the water and use primary equipment to supply oxygen. After comprehensive comparison of various equipment categories, our factory's microporous aerator is more suitable for general industrial wastewater or municipal engineering wastewater. Although there are various types of aeration equipment, it is not only necessary to consider the cost of installation, but also the convenience of later maintenance.