Today, the editor will introduce solutions to the problem of blockage or reduced air output in aerators.
1. Selection of portable air compressor for high-pressure airflow flushing method
This air compressor uses a single-phase power supply, with a working pressure of 0.8-1MPa and a displacement of 0.08 ㎥/min.    
Operation method: Remove the hose connecting the aeration tube or disc from the pagoda head and connect it to the outlet of the air compressor. Start the air compressor, check the aeration status on the water surface, and once it returns to normal, turn off the air compressor. When flushing with high-pressure airflow, it is important to note that the aeration tube plug and all connections should be tightly clamped with throat clamps.    
2. Acid washing method
Choose a large tank or cement pool, pour a dilute solution with a concentration of 5 into the tank or pool, soak the blocked aeration tube in the dilute solution for 12 hours, take it out and rinse it clean with clean water.

Our company is a manufacturer of environmentally friendly fillers for water treatment. We have large injection molding machines, wire drawing machines, ABS pipe machines, honeycomb inclined pipe forming machines, and are equipped with various production equipment such as turning, milling, and planing.